Wednesday, November 30, 2011 in , ,

Windows XP Install

Windows XP is one of the good professional XP in this world from now. It is really easy to install into your computer . The best way install Windows XP is one of  the clean install. All version of windows XP CD are bootable. In order to boot from CD/DVD Rom you need to set the boot sequences. Please look at the boot sequence under your BIOS setup and make sure that the first boot device is set to CD/DVD-ROM. Its have some rules those are,

At first entire your windows CD in your CD or DVD drive, Then Restart your PC.You will press ESC continue. your PC should be identify  that CD. Please make sure you have the raid drivers on your floppy disk. Normally the drivers are supplied on your CD which you can copy to a floppy disk to ready for install. Press S  because you want to install your additional device. Then press Enter from your Key Board. After click enter you get some information then you will select your correct driver for your device and press Enter again. Then you get some information again then press R for repair. Since we are doing a new install of our windows we just press Enter to continue.



After repair you get some Terms and condition in that time you have need to press F8 for accept terms and condition and continue. After this work you have need to select your place where you want to install your windows. You have two partition to select your windows will be installed. Those are,
  • The first partition is C: drive (6000 MB) and 
  • The second partition is E: drive (2180 MB)
You can choose whatever size partition your like. But remember if you have 500 GB hard disc. You will get two partition of 250GB each.Then you can press C button to create your partition. You might be wondered what happened in the D: drive. Windows has automatically located D: drive to CD/DVD-ROM. Select partition drive 1 or C: drive and Enter. After this you have need to choose F for format the using for file system. Then you windows take to formatting in the C: drive and start copying set up file. After the setup has completed copying the files the computer will restart. Windows XP setup wizard will guide to through the setup process of gathering information about your Computer / PC. Then choose your Region and Language. Press Next. After press this Type your name and organization Press Next again. Enter your Product key. After this you can make you Administrator name and Password. If you not like this you can Skip this. After this enter your correct time, date and your time zone. For network setting you can choose typical network and press Next.



Finally windows will start with a welcome screen. Click Next for continue. Then protect for your PC choose turning on automatic updates now and press Next. After this you will press Next and Next again. After this function you have need to select your name just give your first Personal name. You will get a thank you message as a confirmation message. Then you have need to click on the Finish button for complete the set up. After your windows set up. You have to need to install the mother board's disc and other software.

Leave a Reply